IviRFSigGen Configure IQ Impairment [IQI]

IviRFSigGenIQImpairment Capability Group

This VI configures the settings that simulate or correct impairment for the signal generator's IQ modulation. These settings are only used if the IviRFSigGen>>IQ>>IQ Impairment>>IQ Impairment Enabled property is set to TRUE.

	instrument handle The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	i offset Specifies an origin offset voltage to the I signal. The range of allowable values is -100% to +100%. The driver uses this value to set the IviRFSigGen>>IQ>>IQ Impairment>>IQ I Offset property. Units: Percent (%) Default Value: 0.0
	q offset Specifies an origin offset voltage to the Q signal. The range of allowable values is -100% to +100%. The driver uses this value to set the IQ_Q_OFFSET property. Units: Percent (%) Default Value: 0.0
	ratio Specifies the gain imbalance between the I and Q channels. For no imbalance this value is set to 0 %. The driver uses this value to set the IviRFSigGen>>IQ>>IQ Impairment>>IQ Ratio property. Units: Percent (%) Default Value: 0.0
	skew Specifies the adjustment of the phase angle between the I and Q vectors. If this skew is zero, the phase angle is 90 degrees. The driver uses this value to set the IviRFSigGen>>IQ>>IQ Impairment>>IQ Skew property. Units: Degrees Default Value: 0.0
	error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.
	instrument handle out The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.